Grizzly T32795 Скачать руководство пользователя страница 1

Страница: 1 / 4

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 07/21) #CS21970 PRINTED IN CHINA

Introduction

The  Model  T32795  Shears  Sharpening  Jig  is
a  fixture  designed  for  sharpening  scissors  and
shears on the  Model T32720 10" Wet Grinder.

Description Qty

A. Jig ............................................................... 1

B. Clamp ......................................................... 1

C. Knob Bolts M6-1 x 22 ................................. 2

Inventory

Figure 1. Example of Model T32795 in use.

V1.06.21

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

NOTICE

If you cannot find an item on this list, care-

fully check around/inside the machine and

packaging materials. Often, these items get

lost in packaging materials while unpack-

ing or they are pre-installed at the factory.

Figure 2. Inventory.

For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]

MODEL T32795

SHEARS SHARPENING JIG

FOR T32720 WET GRINDER

INSTRUCTIONS

Содержание T32795

Страница 1: ...p 1 C Knob Bolts M6 1 x 22 2 Inventory Figure 1 Example of Model T32795 in use V1 06 21 To reduce your risk of serious injury read this entire manual BEFORE using machine NOTICE If you cannot find an...

Страница 2: ...tanglement can result in death amputation or severe crushing injuries Figure 3 Jig installed on tool rest x 2 Tool Rest Jig 4 Loosen 2 clamp knobs on clamp enough to allow one blade of scissors or she...

Страница 3: ...ening Jig Scissor Blade Rails Beveled Edge Figure 6 Adjusting angles for beveled edge of scissor blade 10 Tilt scissor jig away from grinding wheel con nect grinder to power and turn machine ON 11 Use...

Страница 4: ......