COPYRIGHT © MAY, 2021 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 05/21) #CS21863 PRINTED IN CHINA
V1.05.21
Introduction
The Model T32716 8" Benchtop Metal Shear/
Brake is designed to both bend and shear sheet
metal with one compact tool.
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T32716
8" BENCHTOP
METAL SHEAR/BRAKE
INSTRUCTIONS
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. Model T32716 8" Benchtop Metal
Shear/Brake.
Description Qty
A. Benchtop Shear/Brake (Not Shown) .......... 1
B. Handle ........................................................ 1
C. Hex Bolts M10-2 x 70 ................................. 4
D. Flat Washers 10mm ................................... 4
E. Hex Nuts M10-2 .......................................... 4
F. Hex Wrenches 3, 4mm .........................1 Ea.
G. Fingers
3
⁄
8
",
9
⁄
16
",
13
⁄
16
", 1
9
⁄
16
" ..................1 Ea.
H. Seating Tool................................................ 1
Inventory
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 2. Inventory.
B
C
D
F
G
H
E
Needed for Setup
•
Safety Glasses ....................................1 Pair
•
Cleaner/Degreaser ..................... As Needed
•
Disposable Shop Rags ............... As Needed
•
Disposable Gloves ..................... As Needed
•
Open-End Wrench 17mm ........................... 1
•
Wrench or Socket 17mm ............................ 1
Содержание T32716
Страница 16: ......
