-2-
Model T31643 (Mfd. 9/19)
Operation
Using the lift control lever shown in
Figure 3, the
pallet stacker forks can be raised, lowered, or
placed in the neutral position for moving.
Figure 3. Handle lever positions.
Lift Position: When lever is in lift position, either
hand or foot lift handle can be pumped to lift forks.
Lower Position: Drops forks. Pull lever up
SLOWLY to begin lowering forks. Avoid pulling
lever up quickly or load will drop suddenly.
Neutral Position: Place handle in this position
to move load. In neutral position, pump and lift
mechanism are disengaged so that handle can
move up and down freely while operator moves
stacker.
Neutral
Lower
Lift
1. Move pallet stacker to desired location using
stacker handles, then engage back wheel
brakes (see
Figure 4).
Figure 4. Wheel brake in locked position.
Identification
A. Forks: Adjust to desired width to support and
lift pallet.
B. Stacker Handles: Used to maneuver stacker.
C. Lift Control Lever: Controls manual lift sys-
tem.
D. Hand Lift Handle: Controls hydraulic lift by
hand.
E. Foot Lift Handle: Controls hydraulic lift by
foot.
F. Brakes: Secure wheels.
Figure 2. Stacker components.
A
C
D
E
B
F
To use pallet stacker:
IMPORTANT: Always engage brake when adjust-
ing forks and when stacker is not being moved
from one location to another.
