Grizzly T28930, Инструкция по эксплуатации

Страница: 1 / 8

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T28930
24" HYDRAULIC
BENDING BRAKE
INSTRUCTIONS
COPYRIGHT © MAY, 2020 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 12/18) #CS20186 PRINTED IN CHINA
V1.05.20
Specifications
Product Weight ........................................125 lbs.
Max Width Capacity ....................................... 24"
Max Thickness (Half Width Mild Steel)..14 Gauge
Max Thickness (Full Width Mild Steel) ..16 Gauge
Max Thickness (Aluminum) ..................12 Gauge
Max Thickness (Stainless Steel) ..........18 Gauge
Brake Range..............................................0˚–90˚
Min Reverse Bend ............................................ 1"
Max Beam Lift .................................................. 1"
Max Operating Pressure ........................ 20 Tons
Figure 1. Model T28930.
Introduction
The T28930 24" Hydraulic Bending Brake offers
simple one-handed operation for accurate bend-
ing. A hydraulic ram and bending bar bend sheet
metal from 0˚-90˚.
Description Qty
Additional Person for Lifting ................................. 1
Safety Glasses ............................................. 1 Ea.
Open-End or Socket Wrench 17mm ................... 2
Hydraulic Oil (ISO 32 or 46) ................As Needed
Cloth Rags ...........................................As Needed
Needed For Setup
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Eye injury hazard! Always
wear safety glasses when
using this machine.
Crushing hazard! Always
keep hands clear when
using this machine.
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.