-2-
T26857 Air Hose Reel w/30' Hose
Assembly
Tools Required
Qty
Open End Wrench 10mm .................................. 1
Phillips Head Screwdriver #2 ............................ 1
1. Attach handle to air hose reel assembly with
M6-1 X 12mm Phillips head screws and M6-1
lock nuts (see
Figure 2).
Figure 2. Handle installed on air hose reel.
Handle
The strongest mounting option is a "Through
Mount" (see
Figure 4) where holes are drilled all
the way through the workbench—and hex bolts,
washers, and hex nuts are used to secure the
machine in place.
Mounting
Figure 3. Mounting points in base of hose reel.
Mounting Holes
The base of the Model T26857 has mounting
holes (see
Figure 3) that allow it to be fastened to
a workbench or other mounting surface to prevent
it from moving during operation and causing acci-
dental injury or damage.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Another option is a "Direct Mount" (see
Figure
5) where the machine is secured directly to the
workbench with lag screws and washers.
Machine Base
Workbench
Lag Screw
Flat Washer
Figure 5. Example of a "Direct Mount" setup.
Figure 4. Example of a "Through Mount" setup.
