Model T26417/T26418 (Mfd. Since 1/15)
-23-
To ensure the workpiece is supported during
sanding operations, use the table insert that
matches the corresponding drum and sleeve
(see table below). It is important to keep the gap
between the table insert and drum as small as
possible to reduce the risk of a pinch hazard. Use
the oval inserts when sanding with the table tilted.
Sanding Sleeves
Sanding Drums
Table Inserts
3
⁄
4
"
3
⁄
4
"
1"
1"
1"
1
1
⁄
4
"
2"
2"
2
1
⁄
4
"
Sanding Sleeves
Sanding Drums
Table Inserts
3
⁄
4
"
3
⁄
4
"
1"
2"
2"
2
1
⁄
4
"
3"
3"
3
1
⁄
4
"
Table Inserts
Sanding
To sand a workpiece:
1. Turn spindle sander ON and allow spindle to
reach full speed.
2. Using both hands to maintain control of
workpiece, guide workpiece against rota-
tion of spindle, as shown in
Figure 17. DO
NOT force workpiece against sanding sleeve.
Allow machine to do the work.
Figure 17. Sanding workpiece example.
Spindle Direction
Feed Direction
T26417
T26418
Содержание T26417
Страница 44: ......
