-2-
T26413/T26414/T26415 (Mfd. 9/13+)
Small Item Inventory (Figure 2)
Description Qty
A. Sliding Handle Assembly ........................... 1
B. Handle Lock Knob Bolt .............................. 1
C. Handwheel Handle (T26413 Only) ............. 1
D. Handwheel (T26413 Only) .......................... 1
E. Table ........................................................... 1
F. Hex Wrench 3mm (T26413 Only) ............... 1
G. Hex Wrench 4mm ....................................... 1
H. Hex Wrench 5mm ....................................... 1
I. Round-Nose Die ......................................... 1
J. Cone-Point Die ........................................... 1
K. Square Die ................................................. 1
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting the arbor press. To
reduce this risk, get help
from other people or lifting
equipment rated for weight
of the arbor press.
Cleanup
The unpainted surfaces of your machine are
coated with a heavy-duty rust preventative that
prevents corrosion during shipment and storage.
This rust preventative works extremely well, but it
will take a little time to clean.
Be patient and do a thorough job cleaning your
machine. The time you spend doing this now will
give you a better appreciation for the proper care
of your machine's unpainted surfaces.
There are many ways to remove this rust preven-
tative, but the following steps work well in a wide
variety of situations. Always follow the manufac-
turer’s instructions with any cleaning product you
use and make sure you work in a well-ventilated
area to minimize exposure to toxic fumes.
Before cleaning, gather the following:
•
Disposable Rags
•
Cleaner/degreaser (WD•40 works well)
•
Safety glasses & disposable gloves
•
Plastic paint scraper (optional)
Basic steps for removing rust preventative:
1. Put on safety glasses.
2. Coat the rust preventative with a liberal
amount of cleaner/degreaser (see
Page 8
for offerings from Grizzly), then let it soak for
5–10 minutes.
3. Wipe off the surfaces. If your cleaner/
degreaser is effective, the rust preventative
will wipe off easily. If you have a plastic paint
scraper, scrape off as much as you can first,
then wipe off the rest with the rag.
4. Repeat Steps 2–3 as necessary until clean,
then coat all unpainted surfaces with a quality
metal protectant to prevent rust.
NOTICE
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner, that may
damage painted surfaces.
Figure 2. Small item inventory.
D
A
B
C
E
F
G
H
I
J
K
