MODEL T23082
HOSE REEL
INSTRUCTIONS
To reduce the risk of injury when using this
tool:
•
Make sure the incoming air pressure
does not exceed the maximum rating of
200 PSI for the reel or hose/accessory
you are using. Otherwise, the fittings
could crack or explode.
•
Protect your eyes by wearing safety
glasses or a face shield when assem-
bling, mounting and using the hose reel.
•
Pressurized air may cause injury to
exposed body parts. Never expose any
part of your body to pressurized air.
•
Make sure the hose reel is firmly mounted
to a stable surface before pressurizing.
•
Do not allow children to use the hose
reel. Keep children clear of the work
area.
Copyright © DeCember, 2010 by grizzly inDustrial, inC.
WaRNINg: NO pORTION Of THIS MaNUaL May bE REpRODUCED IN aNy SHapE
Or fOrM wIthOut the wrItteN aPPrOval Of GrIzzly INDuStrIal, INc.
#bl13622 printeD in China
Inventory
the model t23082 is shipped fully assembled.
Specifications
max. incoming air pressure ................... 200 psi
max. hose length ................29
1
⁄
2
ft. of
5
⁄
16
" hose
air Fitting size .........................................
1
⁄
4
" npt
Items Needed
phillips head screwdriver #2 ............................ 1
air Compressor ................................................. 1
air hose (Connects Compressor/hose reel).... 1
Fasteners
1
⁄
4
" ..................................... as needed
Mounting
1. Choose a location for mounting the hose
reel to a wall, floor, ceiling, etc. that uses a
load-bearing structural member capable of
supporting the combined weight of the reel,
hose and any forces applied to it. provide
adequate clearance for the hose reel to
swivel 180˚ left–right.
wall or floor Mounting
mark the location of the mounting holes on
the bracket base (see
figure 1) in the chosen
location, then secure with
1
⁄
4
" grade 8 fasten-
ers.
figure 1. main components.
guide
ceiling Mounting Options
—
use the mounting ring shown in figure 1
to mount the hose reel to a ceiling-mounted
hook.
—
loosen the screws that secure the bracket
to the hose reel assembly, remove the
bracket, mark the bracket mounting holes
in the chosen location, then secure the
bracket with
1
⁄
4
" lag screws and flat wash-
ers. re-install the bracket onto the hose
reel.
mounting
holes
bracket
ring
hose stop
inlet
outlet
