-2-
Model T1250 (Mfd. Since 12/21)
(Replaces Page 2 in Manual)
Assembly
4. Secure end frames and upper supports with
(4) external corner braces and (4) internal
corner braces, using (12) M8-1.25 x 55 but-
ton head cap screws, (24) 8mm flat washers,
and (12) M8-1.25 lock nuts (see
Figure 4).
DO NOT fully tighten fasteners yet.
1. Lay workbench top upside-down on a pro-
tected surface, such as cardboard or a
blanket.
Note: Bottom-side of workbench top has
threaded holes.
2. Attach both end frames and center
frame to workbench top with (4)
5
⁄
16
"-18
x 2" hex bolts and (4) 8mm flat wash-
ers (see
Figure 2). DO NOT fully tighten
fasteners yet.
3. Attach each upper support to workbench top
with (4)
5
⁄
16
"-18 x 2" hex bolts and (4) 8mm flat
washers (see
Figure 3). DO NOT fully tighten
fasteners yet.
5. Secure center frame and upper supports
with (1) support brace and (4) internal corner
braces, using (8) M8-1.25 x 55 button head
cap screws, (16) 8mm flat washers, and
(6) M8-1.25 lock nuts (see
Figure 5).
DO NOT fully tighten fasteners yet.
Figure 2. End frame and center frame attached
to workbench top.
x 2
x 2
End Frame
Center
Frame
End of
Workbench Top
Figure 5. Center frame and upper supports
secured together with braces.
x 8
Upper Frame
Support
Center
Frame
Support
Brace
Internal
Corner
Brace
Figure 4. End frame and upper support secured
together with corner braces.
x 12
End Frame
Upper
Support
Figure 3. Upper support attached to workbench
top.
x 4
Upper
Support
Side of
Workbench
Top
External
Corner Brace
Internal
Corner
Brace
