Grizzly T1239, Руководство пользователя

Страница: 13 / 20

Model T1239 (Mfd. Since 09/17) -11
-
SECTION 4: OPERATIONS
Operating Sander
To operate drywall sander:
1.
Ensure sanding pad is properly
aligned with dust-extraction holes in
sanding head (see
Figure 11), and
connected to approprate dust collec-
tion system.
The pivoting head of the drywall sander
allows for both overhead and vertical sand-
ing. The round sanding head is designed
for exposed drywall seams in the center
of walls or ceilings. The triangular sand-
ing head is designed for inside corners of
walls and ceilings.
Figure 11. Applying sandpaper to pad.
Dust
Extraction
Holes
2. Adjust pressure collar (see Figure 12)
to supply adequate dust collection
during operation.
Note:
Further adjustment during
operation may be needed to ensure
optimum dust collection.
Figure 12. Adjusting pressure collar.
Pressure
Collar
Installing/Removing
Sanding Head
4.
Pull head lock pin outward and back
to disengage sanding head.
The Model T1239 features two sanding
head options: round and triangular. The
sanding heads can be changed quickly
depending on operation.
To install sanding head:
1.
DISCONNECT TOOL FROM
POWER!
2.
Align sanding head bracket with
sander bracket and bring both brack-
ets together, as shown in
Figure 9.
Figure 9. Aligning mounting brackets.
Sanding
Head
Bracket
3. With sanding head and sander body
pressed firmly together, push head
lock pin forward to engage lock (see
Figure 10).
Figure 10. Positioning sanding pad.
Head
Lock
Pin
Locked Unlocked