Grizzly T10874 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 20

Grizzly T10874 Скачать руководство пользователя страница 12

Model T10874 (Mfd. Since 01/15)

-10

-

The Model T10874 uses standard recipro-
cating saw blades. See the Grizzly catalog
or website for a complete listing of avail-
able blades and accessories.

1.

DISCONNECT TOOL FROM POWER!

2. Rotate quick-release chuck counter-

clockwise and hold to disengage blade
lock.

3. Insert blade shank into chuck with teeth

pointed towards pivot joint on adjust-
able pivot foot (see

Figure 7).

Note: Blade can be inserted upside
down; however, the setup outlined in
Step 3 is generally more stable and
safe.

1.

DISCONNECT TOOL FROM POWER!

2. Rotate quick-release chuck counter-

clockwise and hold to disengage blade
lock.

3.

Remove blade by gripping smooth side

of blade and pulling away from chuck.

DO NOT use bent or damaged

blades. The blade could break apart

under stresses of high speed use,

causing serious personal injury.

4. Release chuck to engage blade lock.

5. Verify blade is locked in position by

carefully pulling on it.

Saw blade is sharp and will be hot

after use. Wear gloves to prevent

injury when removing blade.

Installing/Removing

Blades

Installing Blades

Removing Blades

Figure 7. Blade inserted into chuck with

teeth pointed towards pivot joint.

Quick-Release Chuck

Adjustable

Pivot Foot

Pivot Joint

«
...
10
11
12
13
14
...
»

Содержание T10874





















Отзывы:

Нет отзывов