Grizzly T10828 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 16

Grizzly T10828 Скачать руководство пользователя страница 5

Model T10828 (Mfd. since 12/14)

-3

-

No list of safety guidelines can be

complete. Every shop environment

is different. Always consider safety

first, as it applies to your individual

working conditions. Use this and

other machinery with caution and

respect. Failure to do so could result

in serious personal injury, damage to

equipment or poor work results.

Additional Safety Instructions for

Rotary Tool Grinders

ELECTROCUTION HAZARDS. DO NOT
operate  this  tool  in  wet  or  damp  condi-
tions.  Remove  all  liquids  from  the  work
area  before  beginning  operation.  Make
sure your hands are clean and dry.

WORKPIECE CONTACT.  Jamming  the
spinning tool against the workpiece could
cause  the  workpiece  or  tool  to  shatter
and  send  debris  in  all  directions.  Firmly
grasp the rotary tool and ease it into the
workpiece.

TOOL CAPACITIES. To avoid damage
to the tool or workpiece that may cause
operator injury, ALWAYS operate this tool
within the capacities stated on

Page 4.

ACCIDENTAL STARTUP. To avoid unex-
pected startup that may cause injuries,
ALWAYS make sure the rotary speed dial
is turned OFF before connecting the tool
to power.

CLAMP THE WORKPIECE. If the spin-
ning tool slips from the workpiece while
you are holding it, you could suffer pierc-
ing or abrasion injuries. DO NOT hold the
workpiece with one hand and operate the
tool with the other. Secure the workpiece
in a vise or work-holding device before
starting the rotary tool.

EXPLOSION HAZARDS.  Sparks  from
the  grinding  operation  can  easily  ignite
flammable  gasses,  fluids,  or  materials.
ALWAYS make sure that these substanc-
es are completely removed from the work
area before beginning operation.

ENTANGLEMENT HAZARDS.  Loose
clothing  or  jewelry  can  become  entan-
gled with the spinning tool, pulling hands
and fingers into the bit. To avoid this risk,
remove  jewelry,  secure  loose  clothing,
button  long  sleeves,  and  tie  back  long
hair.

«
...
3
4
5
6
7
...
»

Содержание T10828

















Отзывы:

Нет отзывов