t10493, t10494 & t10495 (Mfg since 10/11)
-6
-
inventory
figure 3.
inventory contents.
C
b
a
d
e
F
description
Qty
a.
grinder (t10495 shown) .................... 1
b.
inner Flange ....................................... 1
c.
outer Flange ...................................... 1
d.
Fixed pin spanner Wrench ................ 1
e.
handle ................................................ 1
f.
replacement Carbon brushes ........... 1
d.
grinding Wheel 30 grit (not shown) .. 1
section 3: setup
this tool was carefully packaged for safe
transportation. remove the packaging
materials from around the tool and inspect
it. if you discover any damage,
please
immediately call Customer Service at (570)
546-9663 for advice.
save the containers and all packing
materials for possible inspection by the
carrier or its agent. otherwise, filing a
freight claim can be difficult.
When you are completely satisfied with
the condition of your shipment, inventory
the contents.
if any non-proprietary parts are missing
(e.g., a nut or a washer), we will gladly
replace them; or for the sake of expediency,
replacements can be obtained at your
local hardware store.
unpacking
this tool presents serious injury
hazards to untrained users. read
through this entire manual to
become familiar with the controls
and operations before using the
tool!
serious injury could occur if you
connect this tool to power before
completing the setup process.
do not connect to power until
instructed later in this manual.