T10050 Right angle iron Bender
-3-
Assembly
The Model T10050 requires only minimal assem-
bly before use.
To assemble the machine:
1..
Connect the bender handle to the machine
with the M10-1.5 x 40 hex bolts and 10mm
flat washers (
Figure 5
).
Figure 5..
Attaching handle.
x2
Handle
Hex Bolt
Flat Washer
2..
insert the stop rod with the M12-1.75 hex nut
into the base. Tighten the hex nut against the
base to secure it (
Figure 6
).
Figure 6..
Attaching work stop rod.
Work Stop Rod
Hex Nut
3..
Thread the work stop knob into the work stop,
then slide the work stop onto the work stop
rod (
Figure
7
).
Figure 7..
Work stop.
Work Stop
Work Stop Rod
Knob
