Model T10007 300 Kg Digital Crane Scale
-8
-
Scale Battery
The scale will automatically display the
current scale battery voltage when you
turn the scale
ON
and
OFF
. To check the
voltage during use, press the MR button
on the remote control and the screen will
display SHIFT. Press the F1 button and the
screen will display U X.XX. To return to the
main display, press MR again.
When the battery voltage is lower than
U 5.80, the screen will flash to alert you.
The scale will continue to display for
approximately one minute longer until -Lb-
is displayed on the screen, and then turn
OFF
automatically. The scale will need to
be charged before further use.
To recharge the battery:
1.
Turn the scale
OFF
.
2.
Connect the supplied adapter into the
socket located in the back of the scale,
then into a grounded 110V outlet. The
light turns orange while charging and
turns red when charging is complete.
Note:
The battery should re-charge for
at least 8 hours.
Hold Function
When the load has been added to the
scale, wait until the STB light goes off,
signifying that the load is stable (
Figure 4
).
If you would like the weight value to remain
on the screen, press the HOLD button on
the remote control. To clear the screen,
press the HOLD button again.
Current Zero Value
The current zero value is the tare weight
that was selected. To view the current
zero scale value, press the MR button and
the screen will display SHIFT. Press the
�
button on the remote control to
display the current zero value.
Advance Tare Weight
To input a known tare weight before weigh-
ing an item, press MR and the screen
will display SHIFT. Press TARE, and the
screen will display 000.00. To input the
desired weight, scroll to the right by press-
ing the right arrow (TARE) button on
the remote control until you come to the
number that you would like to change. To
increase the number from zero, press the
left button (
�
) button on the remote
control. To decrease the number, press
CLEAR on the remote control. When you
are satisfied with the current number,
press the M+ button to move to the left.
To submit the tare amount, press MR and
the TARE light will come on the scale,
automatically deducting the imputed tare
weight. The tare weight will stay the same
until the scale is turned
OFF
.
Clear Function
To clear, press the CLEAR button and the
screen will flash CLr. If you would like to
approve the clear command, press the
MR button and the screen will display
8.8.8.8.8, confirming the deletion. If you
would like to cancel the clear command,
press the CLEAR button again. The screen
will display noCLr, canceling the deletion.
Search Overload Times
To review how many instances the scale
has been overloaded, press the MR button
and the screen will display SHIFT. Press
the CLEAR button and the screen will
display OL=XX, showing how many times
the scale has exceeded its maximum
capacity.
Display Function
To change the brightness of the display,
press F1. Display brightness ranges from 1
(minimum light) to 5 (maximum light). The
default display setting is 2.
