Specifications
Motor ...........................220V 60Hz Single-Phase
Maximum Amp Draw ...................................7.5 A
Speed ................................................. 2100 RPM
Torque ...................................................240 ft/lbs
Inventory
Refer to
Figure 1
and the table below to inventory
the contents of the shipping box.
MODEL H8368
ELECTRIC POWER
DRAWBAR
INSTRUCTIONS
�
�
�
�
�
�
�
Figure 1.
Model H8368 inventory.
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS10500 PRINTED IN TAIWAN
Bolt Bag Contents
Qty
Cap Screws M6-1 x 25 ...................................... 3
Lock Washers 6mm ........................................... 3
Cap Screws M6-1 x 12 ...................................... 2
Flat Washers 6mm ............................................ 2
Cap Screw M4-.7 x 8 ......................................... 3
Pins 4 x 23mm .................................................. 2
Cable Tie ........................................................... 1
Figure 2.
Example of the Model H8368 power
drawbar mounted on a mill.
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
REF PART #
DESCRIPTION
1
PH8368001
MOTOR COVER
2
PH8368002
MOTOR 220V 60HZ 1PH
3
PH8368003
MOUNTING PLATE
4
PH8368004
SWITCH ASSEMBLY
5
PH8368005
DRAWBAR BOLT HEAD
6
PH8368006
DRAWBAR SHAFT 7/16-20 X 21-1/2 (R8)
7
PH8368007
COMPLETE BOLT BAG