Grizzly H8236, Руководство пользователя

Страница: 12 / 20

Model H8236 2-Piece Brad Nailer/Stapler Kit -10
-
If you have not read the safety instruc-
tions in this manual, do not operate the
nailer/stapler.
Before you operate your nailer/stapler,
place five to six drops of the included oil
into the quick connect fitting where the
nailer/stapler connects to the air supply.
Brad Nailer
To operate your brad nailer:
1. Connect the air supply to the quick con-
nect fitting.
2. To test for proper nail penetration, hold
the nailer perpendicular to the surface
of a piece of clean scrap wood that is
thick enough for the length of nails you
have loaded.
3.
Depress the safety nose mechanism
against your workpiece.
Operating
5. Pull the trigger.
Stapler
To operate your stapler:
1. Connect the air supply to the quick con-
nect fitting.
2. Place the nose of the stapler firmly
against the workpiece.
3. Before pulling the trigger, make sure
your free hand and other body parts
are positioned out of the way of a
potential path of a staple in case of
deflection.
4.
Pull the trigger.
4. Before pulling the trigger, make sure
your free hand and other body parts
are positioned out of the way of a
potential path of a nail in case of deflec-
tion.
Deflection is caused when grain
irregularities, knots, or foreign
objects inside the wood cause the
nail to change its path, resulting in
the nail puncturing the surface of the
workpiece, as shown in
Figure 7.
Besides damaging your workpiece,
deflection can cause injury if your free
hand is in the path of the deflecting
nail.
Figure 7. Example of nail deflection.
3. Insert a strip of staples into the maga-
zine, as shown in Figure 6 , and slide
the magazine pusher all the way for-
ward.
4.
Release the magazine latch lever to
lock the magazine pusher in place.
Figure 6. Loading staples.