H7817 2000 lb. Electric Winch
-3
-
This winch creates 2000 lbs. of pull-
ing force at the first half-wrap of the
cable. Be sure the mounting loca-
tion is capable of withstanding this
amount of force. Reinforcement
or modification may be required
depending on the mounting loca-
tion. Failure to comply with this
notice could result in damage to
your vehicle and/or property.
NOTICE
The winch is designed to be mounted to a
standard truck step bumper. The vehicle
and bumper must have a minimum towing
capacity of 2000 lbs.
To install the winch:
1.
Temporarily clamp the winch to the
truck bumper with C-clamps.
2.
Use the holes in the base of the winch
as a guide for drilling two
3
⁄
8
" mounting
holes into the bumper.
Note
—
Avoid drilling into any wiring that
may be routed through the inside of the
bumper.
DO NOT weld or drill additional holes
in the winch. This will weaken the
winch and may cause it to break.
3.
Mount the winch with the included hex
bolts, flat washers, lock washers, and
hex nuts, as shown in
Figure 2
, and
attach the winch hook to the loop at the
end of the cable.
Note
—
Use a minimum of ISO Grade 8.8
hex bolts, flat washers, lock washers, and
hex nuts. Use a thread locking compound
such as Loctite
®
on the bolts.
Figure 2.
Winch installation.
Mounting Winch
Содержание H7817
Страница 12: ...H7817 2000 lb Electric Winch 10 ...