Grizzly H7757, Руководство пользователя, Страница: 10 / 24

Model H7757 3" Mini Wool Buffer -8
-
2. Attach the eye shield to the bracket
with the 4mm Phillips head screws, flat
washers, lock washers and hex nuts as
shown in
Figure 4 . The hex nut should
be tightened to a point where the eye
shields are stiff to move.
Figure 4.
Eye Shield Installation.
Screw
Hex Nut
Flat Washer
The buffer must be mounted to a benchtop
or mounting board before it can be used.
An unmounted buffer can become unbal-
anced when in use, potentially causing
serious injury.
Components/Hardware Required Qty
Hex Bolts M4-.7 (length varies) ................ 3
Hex Nuts M4-.7 ........................................ 3
Flat Washers 4mm ................................... 3
Lock Washers 4mm .................................. 3
Mounting
To secure the buffer to a benchtop or
mounting board:
1.
Place the buffer on a workbench or
mounting board no smaller than 12"W
x 10"D.
2.
Using the 4mm holes in the buffer base
as a template, drill holes through the
mounting board or benchtop as appro-
priate.
3. Secure the buffer to the benchtop or
mounting board with 4mm hex bolts,
washers, lock washers, and hex nuts
as shown in
Figures 5 & 6 .
Figure 5. Mounting the buffer (front).
Figure 6.
Mounting the buffer (back).
Figure 3. Eye Shield Bracket Installation.
Screw
Hex Nut
Flat Washer
Lock Washer