H6332 1
1
⁄
4
" Brad Nailer
-2
-
1. HAND INJURIES:
Do not place your
hands near the nail point of entry. A
nail can deflect and tear through the
surface of the workpiece, puncturing
your hand or fingers.
2. COMBUSTIBLE GASES:
Never
connect the nailer to pressurized
oxygen or other combustible gases
as a power source
.
Only use fil-
tered, lubricated, and regulated
compressed air.
3. SAFE HANDLING:
Never point the
nailer at others! Do not keep the
trigger pulled when loading fasten-
ers, carrying, or holding tool. Carry
the nailer only by the handle, never
by any other part. Do not carry the
nailer by the air hose. Disconnect
the nailer from the air hose when
going up and down ladders.
4. CLEANING:
Never use gasoline or
other flammable liquids to clean the
nailer; vapors in the nailer will ignite
by a spark and cause it to explode.
Additional Safety Instructions for Nailers
5. HOSE USAGE:
Make sure your air
hose is designed for the tool in use,
is in good condition, and is long
enough to reach your work without
stretching. However, an overly long
air hose in the work area may be a
tripping hazard.
6. OPERATING QUESTIONS:
If you
are not sure about the intended
operation, stop using the nailer.
Seek formal training or research
books or magazines that specialize
in pneumatic tools.
7. MAINTENANCE:
Always disconnect
air from the nailer when servicing or
installing nails. During maintenance,
a nailer connected to air may fire
accidentally, causing serious per-
sonal injury.
8. COMPRESSED AIR RATING:
Do
not connect the nailer to compressed
air that exceeds 120 PSI.
9. CHECK VALVE:
Do not use a check
valve or any other fitting that allows
air to remain in the tool.
