A
E
I
H
G
F
D
C
B
SHOCK HAZARD! The amplifier must have a
ground prong in the plug to help ensure that
it is grounded. DO NOT remove this prong
to fit the plug into a two-pronged outlet!
Caring For Your
Amplifier
• DO NOT remove the grounding prong to fit the
plug into a two-pronged outlet!
• To keep the amplifier working properly, DO
NOT expose it to rain or moisture.
• DO NOT pull or lift the amplifier by the power
cord.
• UNPLUG the amplifier before cleaning, and
only clean with a damp cloth (no chemicals).
A. INPUT
: Connect your guitar here, using a shielded instrument cable with a 1⁄4" jack.
B. CHANNEL GAIN
: Adjusts the amount of gain in the Drive Channel.
C. CHANNEL SWITCH
: This switch allows you to select Clean/Drive Channel.
D. 3 BAND EQUALIZATION
: The main equalization of the Model H6015 is a classic 3-band passive
network. All pass (no band cut) is attained with the controls in the full clockwise position—unlike
active controls which exhibit a “flat” setting at the 12 o’clock positions.
E. MASTER VOLUME
: This knob controls the pre-gain volume of the amplifier.
F. CHANNEL FOOT SWITCH JACK
: Connect a one button foot switch here for remote control of the
Clean/Drive Channel.
G. HEADPHONES OUTPUT
: For connection to almost any headphone with a 1⁄4" jack.
H. POWER LED
: The power LED illuminates when the power is ON.
I. POWER SWITCH
: Turns power ON and OFF.
MODEL H6015 CONTROLS