background image

H2910 3-IN-1 WOOD, METAL & CONCRETE NAILER

-4

-

INTRODUCTION

Commentary

Most importantly, we stand behind our

tools. If you have any service questions or

parts requests, please call or write us at

the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: [email protected]

Web Site: http://www.grizzly.com

We are proud to offer the Grizzly Model

H2910 3-IN-1 Wood, Metal & Concrete

Nailer. This model is part of a growing

Grizzly family of fine power tools. When

used according to the guidelines set forth

in this manual, you can expect years of

trouble-free, enjoyable operation and

proof of Grizzly’s commitment to customer

satisfaction.

The Model H2910 features 360˚

adjustable exhaust, a convenient bottom-

loading magazine, a safety trigger and a

durable plastic carrying case. 

We are pleased to provide this manual

with the Model H2910. It was written to

encourage safety considerations and

guide you through general operating pro-

cedures and maintenance. This manual

represents our effort to produce the best

documentation possible. 

The specifications, details, and pho-

tographs in this manual represent the

Model H2910 as supplied when the manu-

al was prepared. However, owing to

Grizzly’s policy of continuous improve-

ment, changes may be made at any time

with no obligation on the part of Grizzly. If

you have any comments regarding this

manual, please write to us at the address

below:

Grizzly Industrial, Inc.

C

/

Technical Documentation

P.O. Box 2069 

Bellingham, WA 98227-2069

Read the manual before assembly
and operation. Become familiar with
this tool, its safety instructions, and
its operation before beginning any
work. Serious personal injury may
result if safety or operational infor-
mation is not understood or followed. 

Содержание H2910

















Отзывы: