manualshive.com logo in svg

Grizzly G9743, Руководство пользователя, Страница: 6 / 52

Поделиться
Скачать
Grizzly G9743 Скачать руководство пользователя страница 6

-4-

Model G9743 (Mfg. since 12/07)

The information contained herein is deemed accurate as of 7/31/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G9743

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G9743 7" X 12" GEARED HEAD METAL‐CUTTING

BANDSAW

Product Dimensions:

Weight.............................................................................................................................................................. 383 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 56 x 17-1/4 x 59 in.

Footprint (Length x Width)..................................................................................................................... 40 x 16-3/8 in.

Shipping Dimensions:

Type................................................................................................................................................... Wood Slat Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 464 lbs.

Length x Width x Height....................................................................................................................... 26 x 57 x 46 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement............................................................................................. 110V or 220V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 110V

Full-Load Current Rating................................................................................................. 18.6A at 110V, 9.3A at 220V

Minimum Circuit Size.......................................................................................................... 20A at 110V, 15A at 220V

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length.......................................................................................................................................... 5-1/2 ft.

Power Cord Gauge......................................................................................................................................... 18 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................. 5-15 for 110V

Recommended Plug Type...................................................................................................................... 6-15 for 220V

Switch Type............................................................................................ Sealed Toggle Switch w/Automatic Shut-Off

Motors:

Coolant Pump

Horsepower................................................................................................................................................. 53W

Phase............................................................................................................................................ Single-Phase

Amps................................................................................................................................................... 0.6A/0.3A

Speed................................................................................................................................................ 3440 RPM

Type......................................................................................................................................... Sealed Induction

Power Transfer ............................................................................................................................... Direct Drive

Bearings........................................................................................................ Sealed & Permanently Lubricated

Main

Horsepower............................................................................................................................................. 1.5 HP

Phase............................................................................................................................................ Single-Phase

Amps....................................................................................................................................................... 18A/9A

Speed................................................................................................................................................ 1720 RPM

Type................................................................................................................. TEFC Capacitor-Start Induction

Power Transfer ................................................................................................................................. Gear Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Содержание G9743





















































Отзывы:

Нет отзывов