RAZOR SHARP EDGEMAKING SYSTEM
RECOMMENDED SPEED 3000 - 3600 RPM
Page Four
CAUTION!:
ALWAYS USE
ANSI COMPLIANT EYE
PROTECTION
and
NEVER! - TURN
THE CUTTING EDGE INTO EITHER
WHEEL
.
YES
NO!
IF YOU HAVE ANY PROBLEMS OR QUESTIONS ABOUT THIS
PRODUCT, PLEASE CONTACT THE MANUFACTURER,
TOLL FREE: 1-866-419-4879, FAX: 1-707-459-1541
E-MAIL: [email protected]
MANUFACTURED IN THE USA AND
FULLY WARRANTED
BY:
Razor Sharp Edgemaking System
26195 Otter DR
Willits, CA 95490-8046, USA
Web: www.sharpeningwheels.com
THE WARRANTY ON THIS PRODUCT IS COMPLETELY
UNCONDITIONAL AND FREE OF “
RED TAPE
”!
Should you find a manufacturing defect with one of our wheels
we will replace it free of charge or refund your purchase price,
including shipping.
CALL TOLL FREE: 1-866-419-4879
or 1-877-725-2197
This wheel is a
replacement wheel
(either gritted or slotted) for the eight
inch Razor Sharp Edgemaking System. It will put a polished razor sharp
edge on your knives and tools in just seconds.
Gritted Wheel is Grizzly Part #G5938
Slotted Wheel is Grizzly Part #G5939
THE WHEEL IN THIS PACKAGE IS EIGHT INCHES BY THREE-
QUARTERS OF AN INCH WITH A FIVE EIGHTHS-INCH ARBOR HOLE.
The installed bushing converts it to a one-half inch arbor hole. Simply
remove the bushing for use on a five-eighths inch arbor.
This eight inch wheel is intended for use on a six inch buffer or bench
grinder, turning at least 3,000 RPMs. You will sharpen many knives be-
fore needing to re-surface the grit wheel. The slotted wheel needs to be
“dressed” occasionally with 60 grit sandpaper.
Brought to you by:
RECOMMENDED SPEED 3000 - 3600 RPM
Page One
Phone: (800) 523-4777
Fax: (800) 438-5901
www.grizzly.com
8x75x625GWWB or 8x75x625SWWB
07/12/2010
PLEASE READ THE INSTRUCTIONS!
Including the safety instructions on page four.
