Model G5354 Airbrush
-7
-
SECTION 3: SETUP
Your airbrush left our warehouse in a care-
fully packed box. If you discover the air-
brush is damaged after you have signed for
delivery,
please immediately call Customer
Service at (570) 546-9663
for advice.
Save the containers and all packing materi-
als for possible inspection by the carrier or
its agent.
Otherwise, filing a freight claim
can be difficult.
After you have unpacked the carton you
should find the following:
Model G5354 Inventory (Figure 1)
A.
Glass Jar w/Enclosed Lid .................. 1
B.
Glass Jar w/Suction Lid ..................... 1
C.
Air Hose ............................................. 1
D.
Airbrush .............................................. 1
E.
Airbrush Hanger ................................. 1
F.
Metal Jar ............................................ 1
G.
Adapter .............................................. 1
H.
Nozzle Tip Wrench 2mm ................... 1
I.
Eyedropper ........................................ 1
Inventory
Prior to assembly and use of the air-
brush, it is essential that all parts be thor-
oughly cleaned and dried. Please refer to
Cleaning
in the
MAINTENANCE
section
on
Page 11
for more detailed instructions.
During assembly, make sure all connec-
tions are tight enough to prevent air leaks
but not so tight as to cause damage.
To assemble the airbrush:
1.
Attach one end of the air hose to the
airbrush body, as shown in
Figure 2
.
Assembly
Figure 2.
Air hose attached to airbrush.
Figure 1.
Model G5354 inventory.
A
B
C
D
E
F
G
I
2.
Attach the adapter to the air hose, as
shown in
Figure 3
.
Figure 3.
Adapter attached to air hose.
H
