Model g4173
1
⁄
8
hp power Feeder
-11-
inventory
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
box inventory (Figures 3 & 4)
Qty
a. Base ........................................................... 1
b. arm Bracket ................................................ 1
c. power Feeder Unit...................................... 1
D. arm ............................................................. 1
E. Base Mounting template ............................ 1
F. Elbow Clamp assembly.............................. 1
G. Ball Joint assembly .................................... 1
H. hardware Bag (Figure 4) ........................... 1
—Cap screw M10-1.5 x 25mm
(Elbow Clamp) ......................................... 1
—hex Bolt M10-1.5 x 50mm
(Elbow Clamp)
......................................... 3
—lock lever (arm Bracket Clamp) ............ 1
—hex Nut M8-1.25mm
(arm Bracket Clamp) ............................... 1
—Flat Washer 8mm (arm Bracket Clamp) 1
—t-handle and pivot Bar
(Ball Joint assembly) ............................... 1
—hex Bolt M10-1.5 x 35mm (Base) ........... 4
—lock Washer 10mm (Base) .................... 4
—hex Nut M10-1.5mm (Base) .................... 4
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SuFFOcatiON HazaRD!
immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
Figure 3. Box inventory.
C
F
a
E
B
d
g
h
Figure 4. hardware inventory.
h
