6
©Alcor 2011 All rights reserved
KNOWING THE G41
The G41 has 4 hydraulic wheel motors that allow forward, reverse and turning without relying on chains that stretch and can
break. These motors are controlled by two levers. Two control levers are also provided for lift of the loader arms and tilt of
the attachment plate. The control levers are sensitive and require some practice to enjoy the manoeuvrability they will
provide to the operator.
Attachments are controlled by the accessory control lever, this is a push to engage and pull to engage lever with detent. The
center position is the “OFF” position. This allows for clockwise and counter clockwise rotation of a hydraulic motor or in
and out of a hydraulic cylinder. (Keep from using the detent if operating an accessory with a cylinder).
The G41 also provides the ability to decide how much hydraulic oil flow the operator wants to direct to the accessory by
adjusting the flow control lever.
SPECIFICATIONS
Model:
#410000
Engine:
Kohler CH20S
Weight:
1190 lbs
Weight with bucket:
1310 lbs
Length:
66”
Length with bucket:
86”
Height:
52”
Width:
39”
Wheelbase:
32”
Clearance:
5.75”
Hinge pin height:
69.75”
Angle of departure:
22 deg.
Dump angle: (std bucket):
41 deg.
Rollback:
35
Reach at 41 deg. Dump:
23.75”
Operating capacity:
500 lbs
Tip load:
1000 lbs
Max. speed:
4 mph
Gasoline capacity:
8 gal.
Hydraulic oil capacity:
15 gal.
Hydraulic press. main valve:
2900 psi
Hydraulic press. accessory valve:
2500 psi
Hydraulic pumps
12 gal.
Wheels (std):
18 X 8.50-8
