Grizzly G3616, Руководство пользователя

Страница: 37 / 72

G3616/G3617 Mill 35
SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Cleaning the Model G3616/G3617 is relatively
easy. Vacuum excess metal chips from the table
and ways, and wipe off the remaining waste with
a dry cloth. If any coolant is left on the table, wipe
it up with a rag. Treat all unpainted cast iron and
steel with a non-staining lubricant after cleaning.
Cleaning
Protect the unpainted cast iron surfaces by wiping
them clean after every use—this ensures mois-
ture does not remain on bare metal surfaces.
Keep exposed cast iron rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9.
Unpainted Cast Iron
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Check to ensure V-belts are tight.
• Clean machine to remove debris.
• Make sure table/vise are clean of metal chips
before placing anything on/in them.
• Clean spindle openings before inserting
tools.
• Any other unsafe condition.
Schedule
Weekly Maintenance:
• Thoroughly clean machine ways of chips and
debris.
• Clean/grease longitudinal, cross, and knee
lead screws.
Monthly Check:
• V-belt tension, damage, or wear.
• Clean/vacuum dust buildup from inside cabi-
nets and off motors.
• Check oil level in gear box and power feed;
fill if needed.
Quarterly Check:
• Clean out coolant tank and replace coolant.
Your Model G3616/G3617 requires very little
maintenance. A thorough cleaning, on a regular
basis, will increase the machine durability and effi-
ciency by removing chips and grime that can gum
up moving parts.
A regular application of a protective spray coating
will keep the table and other bare metal parts from
rusting and pitting.
Remember:
When performing maintenance and
repairs on shop equipment, always disconnect the
machine from its power supply first!
General