Grizzly G1030, Руководство пользователя

Страница: 13 / 36

g1030 dust Collector
-11-
assembly
To assemble your machine:
1. position the base plate upside down and
mount the casters to the base plate using
(16)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts, as shown in
figure 3.
figure 3. Mounting casters to base.
2. set the collector body on top of the base
plate so the intake portion is near the edge of
the base plate and the bolt holes are aligned,
as shown in
figure 4. secure the collector
body to the base plate with (4)
5
⁄
16
"-18 x
1
⁄
2
"
flange bolts.
3. insert one of the rubber gasket between the
collector and lower outlet flange, and secure
using (8)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts, as shown
in figure 5.
Note: When connecting parts that have a
gasket between them, always tighten the fas-
teners in a diagonal and rotational manner to
ensure the gasket does not become crimped
and the seal compromised.
figure 5. Mounting outlet to collector body.
figure 4. Mounting collector to base.
Collector Body
Flange Bolts
lower outlet Flange
4. insert one of the rubber gaskets between the
outlet flange and the collector flange. secure
with eight (8)
5
⁄
16
"-18 x
1
⁄
2
" bolts provided.
repeat the procedure for the other collector
on the opposite side (see
figure 6).
Note: The inside of the collectors are funnel
shaped and force the air around in a cyclone
motion. Make sure that the inside taper (fun-
nel) is facing downward and that the collector
inlet flange faces toward the collector body.
figure 6. Collector secured to outlet.
gasket