manualshive.com logo in svg

Grizzly G0844, Руководство пользователя

Поделиться
Скачать
Grizzly G0844 Скачать руководство пользователя страница 8

-6-

Model G0844 (Mfd. Since 2/18)

Machine Data Sheet

The information contained herein is deemed accurate as of 10/13/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0844

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0844 14" X 20" VARIABLE‐SPEED BENCHTOP

WOOD LATHE

Product Dimensions:

Weight.............................................................................................................................................................. 110 lbs.

Width (side-to-side) x Depth (front-to-back) x Height............................................................... 41-1/2 x 17-1/2 x 18 in.

Footprint (Length x Width)....................................................................................................................... 35-1/2 x 9 in.

Shipping Dimensions:

Type............................................................................................................................................................. Wood Box

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 137 lbs.

Length x Width x Height....................................................................................................................... 39 x 12 x 23 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 110V, Single-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................ 11A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 16 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 5-15

Switch Type.................................................................................................................... Push Button ON/OFF Switch

Motors:

Main

Horsepower................................................................................................................................................ 1 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 11A

Speed................................................................................................................................................ 1700 RPM

Type....................................................................................................................... Universal Brush-Type Motor

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Operation Information

Swing Over Bed......................................................................................................................................... 14 in.

Swing Over Tool Rest Base....................................................................................................................... 10 in.

Distance Between Centers........................................................................................................................ 20 in.

Max. Distance Tool Rest to Spindle Center................................................................................................. 5 in.

No of Spindle Speeds............................................................................................................................ Variable

Spindle Speed Range....................................................................................................................... 300 - 3300

Содержание G0844

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды