Grizzly G0828 Скачать руководство пользователя страница 15

Model G0828/G0829 (Mfd. Since 02/17)

-13-

Lifting & Placing

HEAVY LIFT!

Straining or crushing injury 

may occur from improperly 

lifting machine or some of 

its parts. To reduce this risk, 

get help from other people 

and use a forklift (or other 

lifting equipment) rated for 

weight of this machine.

To lift and place shear on workbench:

1.  Move shear to installation location while it is 

still on shipping pallet.

2.  To avoid damage from lifting straps, remove 

M6-1 x 12 cap screws and 6mm flat washers 
(14 on G0828, 16 on G0829) securing lower 
cover,  blade  guard,  and  upper  cover,  (see 

Figure 6).

7.  Fasten shear to workbench as recommended 

in 

Bench Mounting.

3.  Remove  fasteners  securing  shear  to  pallet. 

Save hardware for mounting in 

Step 7.

4.  Position  straps  under  shear  and  attach  to 

forklift.  Or,  with  help  from  others,  lift  shear 
onto workbench and proceed to 

Step 6.

Bench Mounting

The  base  of  this  machine  has  mounting  holes 
that  allow  it  to  be  fastened  to  a  workbench  or 
other mounting surface to prevent it from moving 
during operation and causing accidental injury or 
damage.

The  strongest  mounting  option  is  a  "Through 
Mount"  (see  example  below)  where  holes  are 
drilled  all  the  way  through  the  workbench—and 
hex  bolts,  washers,  and  hex  nuts  are  used  to 
secure the machine in place.

Machine Base 

Workbench 

Hex
Bolt

Flat Washer 

Flat Washer 

Lock Washer 

Hex Nut 

Machine Base

Workbench

Lag Screw

Flat Washer

Another option is a "Direct Mount" (see example 
below)  where  the  machine  is  secured  directly  to 
the workbench with lag screws and washers.

Figure 7. Workbench through mount.

Figure 8. Workbench direct mount.

5.  Use  forklift  to  raise  shear.  Remove  pallet, 

then lower shear onto workbench.

6.  Re-install  guard  and  covers  removed  in  

Step 2.

Figure 6. Remove guard and covers before 

connecting lifting straps (G0828 shown).

Blade Guard

Lower 

Cover

Upper 

Cover

Содержание G0828





































Отзывы: