-2-
Model G0822 (Mfd. Since 06/17)
Controls &
Components
A. Power Button (Green): Illuminates when
machine is connected to power. Starts spin-
dle rotation when pressed.
Note: Spindle switch must be engaged in
either the FORWARD/REVERSE position for
machine to begin spindle rotation.
B. Spindle Direction Switch: Toggles between
FORWARD (left), NEUTRAL (center), and
REVERSE (right).
C. Digital Readout: Displays spindle RPM.
D. OFF Button: Stops spindle rotation.
E. E-Stop Button: Cuts power to the spindle
motor and remains depressed until reset.
Twist clockwise to reset.
F. Variable-Speed Dial: Controls spindle speed
from 100–600 RPM (low) to 425–2500 RPM
(high), depending on High/Low position of
V-belt.
Refer to the
Figure below and the following
descriptions to become familiar with the basic
controls and components of this machine.
Understanding these items and how they work will
help you better understand the rest of the manual
and reduce your risk of injury when operating this
machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Downfeed Controls
Figure 1. G0822 control panel.
A
B
C
E
D
F
