Grizzly G0767, Руководство пользователя

Страница: 31 / 48

Model G0767 (Mfd. Since 1/14)
-29-
SECTION 6: MAINTENANCE
Cleaning
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Maintenance
•
Check/tighten mounting bolts.
• Check/replace worn/damaged abrasive belt.
• Empty spark trap.
• Vacuum debris from floor around machine.
• Check/repair worn or damaged wires.
• Check/resolve any other unsafe issues.
Weekly Maintenance
•
Clean machine.
• Clean and protect front profile rollers.
• Clean and lubricate vise guide rods and lead-
screws.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Use a shop vacuum to remove debris from the
outside of the machine, especially from the mov-
ing parts of the belt tension lever and vise. Open
the belt and deburring station covers, remove the
abrasive belt, and vacuum all debris from inside
machine, rollers, and deburring platen.
Metal debris from flying sparks left on the floor
presents a slipping hazard. Vacuum the area
around the machine on a daily basis.
Wipe the profile rollers clean with shop rags and
mineral spirits. When dry, apply a light coat of rust
preventative.
Lubrication
Vise Guide Rods
The tube vise moves side-to-side and from front-
to-back on four guide rods (see
Figure 37).
Move the vise as necessary to access the full
length of the guide rods and clean any debris from
their surfaces with shop rags and mineral spirits.
When dry, wipe with a clean shop rag damp with
light machine oil.
Leadscrews
The vise has two leadscrews (see
Figure 38).
Move the vise as necessary through the full length
of the leadscrews and clean any debris from the
threads with a stiff brush and mineral spirits.
When dry, apply a thin coat of light machine oil
and work the lubricant into the threads with a
clean, stiff brush. Wipe away any excess oil. Move
the vise through the full length of each leadscrew
to distribute the oil.
Figure 37. Locations of vise guide rods.
Guide Rods
Guide Rod
Figure 38. Locations of vise leadscrews.
Leadscrews