manualshive.com logo in svg

Grizzly G0766, Руководство пользователя

У вас есть Grizzly G0766, но вам нужен руководство пользователя? На нашем сайте вы можете скачать бесплатно Руководство владельца для данного изделия. Просто загрузите его с manualshive.com и начните пользоваться вашим Grizzly G0766 уже сегодня!

Поделиться
Скачать
background image

Model G0766 (Mfd. Since 11/17)

-7-

The information contained herein is deemed accurate as of 12/13/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G0766

Spindle Information

Spindle Taper............................................................................................................................................ MT#2
Spindle Thread Size..................................................................................................................... 1-1/4" x 8 TPI
Spindle Thread Direction.................................................................................................................. Right Hand
Spindle Bore............................................................................................................................................. 3/8 in.
Type of Included Spindle Center................................................................................................................. Spur
Indexed Spindle Increments............................................................................................................. 10, 30 deg.
No of Indexes................................................................................................................................................. 24

Tool Rest Information

Tool Rest Width......................................................................................................................................... 14 in.
Tool Rest Post Diameter.............................................................................................................................. 1 in.
Tool Rest Post Length........................................................................................................................... 2-1/4 in.
Tool Rest Base Height................................................................................................................................. 2 in.

Tailstock Information

Tailstock Taper.......................................................................................................................................... MT#2
Type of Included Tailstock Center............................................................................................................... Live

Construction

Bed....................................................................................................................................................... Cast Iron
Frame................................................................................................................................................... Cast Iron
Stand.................................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Headstock............................................................................................................................................ Cast Iron
Tailstock............................................................................................................................................... Cast Iron
Paint Type/Finish.................................................................................................................................... Enamel

Other Related Information

Bed Width.................................................................................................................................................. 10 in.
Faceplate Size............................................................................................................................................. 6 in.

Other Specifications:

Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time .............................................................................................................. 1 Hour
Serial Number Location .................................................................................................................................. ID Label
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No

Features:

Low speed range of 100–1200 RPM and high speed range of 330–3200 RPM
Electronic variable-speed control with digital spindle-speed indicator
Headstock rotates 180° and positions anywhere along the bed
Single-phase frequency drive provides three-phase variable-speed control without three-phase power
10º spindle indexing
Tailstock, headstock, and tool rest support have lever-action cam locks for quick positioning
Forward/reverse spindle control
4-1/4" tailstock barrel travel

Accessories Included:

Spur center
Cupped live center
Knock-out tool
Tool rest
Faceplate 6"
Indexing pin

Содержание G0766





















































Отзывы:

Нет отзывов

Похожие инструкции для G0766

Record Power DML36SH-CAM Original Instruction Manual preview
DML36SH-CAM
Бренд: Record Power Страницы: 32
TigerStop TigerFence SLR Installation Manual preview
TigerFence SLR
Бренд: TigerStop Страницы: 32
Jet BDB-1340A Assembly Instructions preview
BDB-1340A
Бренд: Jet Страницы: 4
WABECO CC-D6000 hs Operating Instructions Manual preview
CC-D6000 hs
Бренд: WABECO Страницы: 168
mori seiki CL-15 Service Manual preview
CL-15
Бренд: mori seiki Страницы: 16
Milltronics SL12 OPT Instruction Handbook Manual preview
SL12 OPT
Бренд: Milltronics Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды