model g0719 (mfg. since 10/10)
-15-
figure 8.
door w/panel installation.
figure 9.
Foot installation.
assembly
When assembling this machine, we recommend
tightening fasteners with hand tools only. Air or
electric impact tools can easily over-tighten fas-
teners, causing them to dig into the paint or strip
threads
to assemble the cabinet and mount the
machine:
1.
Fasten the left and right panels to the rear
panel, as shown in
figure 6
, using (4)
5
⁄
16
"-
18 x
3
⁄
4
" carriage bolts and (4)
5
⁄
16
"-18 flange
nuts.
figure 6.
side and rear panel installation.
2.
Fasten the upper and lower shelves, as
shown in
figure 7
, using (8) m6-1 x 12 flange
bolts.
figure 7.
shelf installation.
3.
Fasten the panel and door assembly to the
left and right panels, as shown in
figure 8
,
using (4)
5
⁄
16
"-18 x
3
⁄
4
" carriage bolts and (4)
5
⁄
16
"-18 flange nuts.
4.
invert the cabinet, thread the (4)
3
⁄
8
"-16 hex
nuts onto the feet, and install the feet into the
base, as shown in
figure 9
.
5.
Adjust the feet to approximately the same
height, then return the cabinet right side up.
