Grizzly FLOORING STAPLER H5977, Инструкция по эксплуатации

Страница: 3 / 16

Model h5977 (Mfg. since 2/07) -2
-
10. use proper air hose for the
tool. Make sure your air hose is in
good condition and is long enough to
reach your work without stretching.
11. Wear proper apparel. do
not wear loose clothing, gloves,
neckties, rings, bracelets, or other
jewelry which may get caught in
moving parts. non-slip footwear is
recommended. Wear a protective
hair covering to contain long hair.
12. alWays use safety glasses.
everyday eyeglasses only have
impact resistant lenses, they are
not safety glasses.
13. alWays Wear respirator
or dust masK when grinding,
sanding, blowing compressed air, or
any other activity that causes or stirs
up dust.
14. Wear approved hearing
protection.
15 secure WorK. use clamps or a
vise to hold work when practical. it is
safer than using your hand and frees
both hands to operate tool.
16. do not overreach. Keep prop-
er footing and balance at all times.
17. maintain tools With care.
Keep tools lubricated and clean
for best and safest performance.
Follow instructions for lubricating
and changing accessories.
18. reduce the risK of
unintentional starting/
firing. do not carry tool with
hand on trigger and always discon-
nect the air hose when not in use.
safety instructions for pneumatic tools
19. disconnect tools before ser-
vicing and changing accessories.
20. use the recommended
accessories. Consult the
owner’s manual for recommended
accessories. the use of improper
accessories may increase the risk
of injury.
21. checK damaged parts. Before
further use of the tool, a guard or
other part that is damaged should
be carefully checked to determine
if it will operate properly and per-
form its intended function. Check
for alignment of moving parts, bind-
ing of moving parts, breakage of
parts, mounting, and any other con-
ditions that may affect its operation.
replace/repair any parts that may
affect the proper operation of the
tool.
22. never leave unattended
tool connected to air.
disconnect the air hose and do
not leave tool unattended until it is
relieved of any built up pressure.
23. never alloW untrained
users to use this tool
While unsupervised.
24. if you are unsure of the
intended operation, stop
using the tool. seek formal
training or research books or maga-
zines that specialize in pneumatic
tools.