Section 1: Install Casters and Base Angles
Section 2: Attach Top and Sides
Section 3: Attach Back Panel
a. Install a
C as ter
onto each of the two
B as e Angles
using four 1/4-20 x 3/4"
Cross-head Screws and four 1/4-20
Hex Nuts for each.
b. Attach
L eft B as e Angle
to the bottom
of
L eft H S ide
using three 1/2" Wood
Screws on the side and three 3/4"
Wood Screws on the bottom.
c. Attach
R ight B as e Angle
to the
bottom of
R ight H S ide
using three
1/2" Wood S crews
on the side and
three
3/4" Wood S crews
on the
bottom.
a. Insert two Cams into holes at top of
R ight H S ide
. Arrows on cams must
point to connecting holes at top edge.
Do the same on the
L eft H S ide
.
b. Screw two 8mm Connecting Bolts into
the 7th hole from the top on right and
left sides
of
R ight H S ide
. Do the
same on
L eft H S ide
.
c. Screw two 34mm Connecting Bolts into
the bottom holes on right and left sides
of
R ight H S ide
. Do the same on
L eft
H S ide
.
d. Screw four 34mm Connecting Bolts
into the four holes on the bottom of
Top.
e. Insert four White Plastics Cams into
holes on bottom of
Header B as e
.
f. Screw four Cams into holes on bottom
of
B as e S helf
.
g. Place
Header B as e
over connectors
at top of
R ight H S ide
. Cams must be
facing towards the bottom and curved
edge facing the front of display. Turn
Cams fully clockwise to attach.
h. Place
B as e S helf
on bottom 34mm
Connectors on
R ight H S ide
. Cams in
Base Shelf must be facing towards
bottom of display. Turn Plastic Cams
on
B as e S helf
fully clockwise to
attach.
i. Lower
L eft H S ide
onto
B as e S helf
and
Header B as e
and attach in the
same manner.
j. Attach
Top
by inserting Connecting
Bolts
into holes on the top of
L eft H
S ide
and
R ight H S ide
. Make sure
Top
and
S ides
fit securely. Turn Cams
in each
S ide
to attach
Top
.
k. Attach
Toe K ick
to bottom front of the
display with six 1/2" Wood Screws on
the sides and two 3/4" Wood Screws
on the bottom.
Carefully turn Display unit over onto its
face.
a. Place
B ack P anels
on unit with large
holes facing top of unit.
b. Insert
H-channel
between Back
Panels pressing each Panel into
grooves in the
H-channel
.
c. Align
B ack P anels
with holes on back
of Display unit and attach using 3/4"
Wood Screws (14).
Left H Side
Right H Side
Left
H Side
Right
H Side
a
b
c
Header Base
Located Here
(Hole 7)
a
a
b
b
c
c
Header Base
Located Here
(Hole 7)
k
h
j
g
Lay
L eft H S ide
and
R ight H S ide
adjacent
to each other with holes pointing upward.
e
d
f
Top
Header
Base
Base
Shelf
Top
Header
Base
Base
Shelf
i
a
a
b
3
2