PRACTICAL INSTRUCTIONS FOR USE
Prior to each use, a visual inspection of the binding status is required.
In particular:
•
whether the binding is correctly attached to the ski,
•
whether the screws are properly tightened,
•
whether the internal structure of the ski is damaged,
•
whether the ski is damaged in the area of the binding
attachment.
If at least one of the above is not correct, do not use the ski moun-
taineering set until the defect has been repaired by an authorized
service center.
GRIZZLY.SKI bindings differenciate left and right side, so it is neces
-
sary to use skis so that the binding always has a securing arm from
the outside.
If the binding is mounted firmly on the ski, no other ski boot may be
used, only the one for which the binding was mounted.
If the binding heel is on a adjustment plate, it is necessary to check
the distance of the heel when changing the ski boot, whether it is
correctly adjusted by a professionally qualified person.
Before clamping the ski shoes to the binding, make sure that the
skis, ski shoes and the bindings are completely free of ice, dirt,
or other foreign bodies that could lead to a reduction in normal
binding functions.
Some binding functions can be handled with a ski pole. Using a ski
pole can cause scratches and / or premature wear of the product
surfaces.
In uphill mode, separation between the ski boot and the binding
only occurs in the event of severe deformations of the material due
to an event, external load or special stress. If this happens, please
stop using the product.
Only the correct size TORX 20 wrench can be used to tighten the
screws.
If in doubt about the perfect functionality of one or more binding
components, do not use the product and seek professional service
for a deeper inspection of the product.
CARE, MAINTENANCE AND STORAGE
Store the binding in a dry and protected place. Do not expose it
to excessive heat. Do not make any modifications or changes to
it. Any of these steps may void your warranty. It can also jeopard-
ize the functionality of the binding and increase the possibility of
structural damage.
WARRANTY CONDITIONS
GRIZZLY.SKI warrants that the product will be free from manufactur-
ing or material defects for two (2) years from the date of purchase.
The effective date of the warranty must be documented by proof
of purchase.
The 24-month warranty applies to any product that is properly
installed, set up and used with regard to the place of use and the
content of the product.
Bindings to “DEMO / TEST” as well as to RENTAL are intended
for unusual and particularly intensive use, which can change the
continuous performance of the product and accelerate the wear
and tear of the product itself. The warranty period for “DEMO /
TEST” and RENTAL products is reduced to one year (1) from the
date of purchase.
GRIZZLY.SKI bindings are NOT SAFELY CERTIFIED by any certifica
-
tion body, as they DO NOT COMPLY TO ANY DIN / ISO SAFETY
STANDARDS.
WARRANTY DISCLAIMER
Damage caused by improper handling, improper installation, non-
compliance with the product user manual, insufficient maintenance
and care, a ski accident, incorrect use of the product or moral wear
and tear, any modification made to the product as well as use in
combination with unsuitable ski shoes is excluded from the warranty.
All wear parts and prints are excluded from the warranty.
GRIZZLY.SKI is not liable for causal or consequential damages of any
kind, except where such limitation of liability is expressly prohib
-
ited by applicable law. Each of the implied warranty claims will be
expressly disclaimed, unless such disclaimer is prohibited by law.
In this case, the warranty claim is valid for the longest period of the
above-mentioned warranty period.
If all warranty conditions are met, GRIZZLY.SKI will start the warranty
process and provide the best possible support in order to complete
the process in the fastest possible time.
Based on the condition of the product, GRIZZLY.SKI will be able
to choose the best solution between the replacement of the entire
product, part of it, or just its repair. An additional warranty period
of 6 months is provided for parts replaced by GRIZZLY.SKI during
official service. If the warranty process requires the product to be
sent to the company, the product itself must be returned to the
original box, including all parts. No compensation can be claimed
from GRIZZLY.SKI for any delay in the warranty procedures.
—
9
—
—
8
—
