Griven GR0660, Инструкция по эксплуатации

Страница: 21 / 32

English 21
9.4 AUTOMATIC mode
Press ENTER when the display shows AUTOMATIC.
This mode allows you to run or to create programs. A maximum number of 4 programs is available; each program
can perform up to 50 scenes.
• PROGRAM 1
• PROGRAM 2
• PROGRAM 3
• PROGRAM 4
• RUN PROGRAMS
9.4.1 Programs execution
Press ENTER when the display shows RUN PROGRAMS.
By selecting “ON” the programs execution is enabled.
By selecting “OFF” the programs execution is disabled.
If the DMX signal is present (Input), it won’t be possible to enable the Automatic Mode and the display will •
show “DMX LINE BUSY
9.4.2 Programs setting
Select, by using the buttons UP and DOWN, the program (from #1 to #4) to be modified/run and then press
ENTER.
You will access a sub-menu with the following options:
• PROGRAMMING
• PLAY
Programs execution “PLAY”:
By selecting ON the programs execution is enabled
By selecting “OFF” the programs execution is disabled
Program settings “PROGRAMMING”:
Select PROGRAMMING by using the buttons UP and DOWN and then pressing ENTER.
By selecting the scene ( SCENE 01 SCENE 02 …) through the buttons UP and DOWN and then pressing ENTER, you
will access a sub-menu with the following options:
• CREATE / EDIT
If the scene does not exist the display will show CREATE, otherwise EDIT.
By pressing ENTER you will get the programming menu, while pressing MENU you will go back to the previous menu
The display will show the following message:
P1-SCENE 01
CREATE
Where P1 refers to the program and SCENE 01 to the scene to be created.
• DELETE
Select YES or NO through the buttons UP and DOWN to delete the scene
The display will show the following message
P1-SCENE 01
DELETE? NO
If the scene does not exist the display won’t show the option DELETE.