6.1 Master -Slave
More
KOLORSTREAM® MK2
unit can be set to ‘SLAVE’ to follow the ‘MASTER’ unit in
synchrony. The ‘MASTER’ unit must be set to MASTER ON, the ‘SLAVE’ units must be
set to ‘MASTER OFF’(with address number 1 and options 2,3 and 4 set to off).
The line terminal is a resistor fitted between the 2 Signal Pins (2 and 3) at the end of
the DMX line. This is to avoid the defective functioning of the DMX line.
A 120 Ohm resistor is suggested.
KOLORSTREAM MK2
can also operate on ‘SLAVE’ mode when the ‘MASTER’ unit is a
KOLORADO MK2
or
KOLORADO MK3
.
7.0 MAINTENANCE
All lanterns require regular maintenance to ensure maximum performance and light
output.
Please follow these instructions:
• clean dichroics regularly, as even a thin layer of dust can reduce the light output
and scatter the beam;
• replace the lamp in case it is damaged or deformed;
• carefully check the electrical connections, particularly the earth connection;
• replace the lenses, the mirrors and the dichroic filters if they are visibly damaged;
• replace all the damaged components
IMPORTANT: clean regularly the fans and the grids. Don't use screw drivers or sharp
objects which may damage the fans or other parts of the lantern. The grids can be
removed by unscrewing the 4 self-tapping screws.
Slave
Slave
Slave
Master
17
