English
25
8.2 Fixed colour mode monochrome by remote control
8.3 SLAVE configuration RGBW
To set up the unit as SLAVE set the 5 channels DMX mode with address 001.
8.4 SLAVE configuration monochrome
To set up the unit as SLAVE set the unit with dmx address 001.
When operating in DMX mode, the projector can accept the following RDM commands:
• discovery
Upon request of the RDM controller, the projector adverts its own presence (the RDM controller will display the
projector between a list).
• DMX address reading and setting.
• Channels number reading and setting.
• On / Off identification
This command is used to identify the projector you want to get access to (the identification happens by swit-
ching on at full intensity all the LEDs).
• Manufacturer
The name of the manufacturer (Griven) is displayed.
• Model description
The projector model is displayed.
• Software version description
The version of the firmware in use on the projector is displayed.
• Temperature
The LEDs operating temperature value is displayed.
Function
Keys
Description
Fixed
colours
mode input
The preset colours mode is activated or deactivated by the (TV) key.
Colour
intensity
+
-
The intensity of the white colour is adjusted by the VOL+ and VOL- keys by
256 steps.
9.0 RDM functions
