32
English
Now the unit is in AUTOMATIC mode and the diplay will keep reading “AUT”.
To exit from the AUTOMATIC mode, press the “MENU” button, select “ACT” and press “ENTER” to confirm.
Select “OFF” to deactivate the AUTOMATIC mode. Press ENTER to confirm.
The following table shows the light output colour effect according to the programme.
9.2 MASTER configuration
To set up the unit as MASTER the same instructions for the set up as AUTOMATIC must be followed (see paragraph
9.1 AUTOMATIC configuration).
9.3 SLAVE configuration
To set up the unit as SLAVE set the DMX mode 5 channels with address 001.
In the FIXED COLOURS mode, it is possible to manually turn on the LEDs, without the use of a DMX.
In this mode, the projector also behaves as a master and can control a number of projectors SLAVE.
10.1 MASTER configuration
To activate the FIXED COLOUR mode, press the “MENU” button up to visualize “ADR”. Through the “UP” and
“DOWN” keys select “COL”. Press “ENTER” to confirm.
Through the “UP” and “DOWN” keys select “ACT”. Through the “UP” and “DOWN” keys select “ON” or “OFF” to
activate or deactivate the FIXED COLOUR mode. Press “ENTER” to confirm.
Now, through the “UP” and “DOWN” keys, it is possible scroll the colours.
1. Red
RED
2. Green
GRE
3. Blue
BLU
4. White
UHT
Once positioned onto the desired colour, press “ENTER” to confirm. By the keys “UP”and “DOWN” select “ON” or
“OFF”. It is possible to activate or disactivate the colours. Press ENTER to confirm.
Now the unit is in FIXED COLOURS mode and the diplay will keep reading “COL”.
To exit from the FIXED COLOURS mode, press the “MENU” button, select “ACT” and press “ENTER” to confirm.
Select “OFF” to deactivate the FIXED COLOURS mode. Press ENTER to confirm.
10.2 SLAVE configuration
To set up the unit as SLAVE set the 5 channels DMX mode with address 001.
Program N° Effect
1
Red - Magenta - Yellow
2
Red - Magenta - Yellow - White
3
Green - Cyan - Yellow
4
Green - Cyan - Yellow - White
5
Blue - Cyan - Magenta
6
Blue - Cyan - Magenta - White
7
Green - Cyan - Blue - Magenta - Red - Yellow
8
Green - Cyan - Blue - Magenta - Red - Yellow - White
Warning!
It is possible to select more programmes which will be executed in sequence.
If MASTER-SLAVE mode is being used, the fixture cannot be controlled by a DMX control device
and no other DMX control device must be present along the line!!
If the DMX connectors in the rear panel of the unit are not used,
they are to be connected one with each other, in order to preserve the IP65 protection rate.
10.0 FIXED COLOURS mode
