3.2 Connection to mains power
The unit can operate with voltage from 100-277Vac and with frequency of 50 and 60Hz.
For the connection use main cable in the side of the rear boxl of the fixture and connect as shown below.
3.3 Projectors connection
The electronic driver AL2079 powers up to 20 Graph-i-Cell units.
Connect the units according to the following configuration scheme:
Live
Ground
Neutral
Brown
Yellow Green
Blue
Main supply
Warning!
Follow the instructions provided along with the connection kit to perform the connections.
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• The unit must never be installed if not grounded electrically.
• It is suggested to use a magnetothermic switch along the power supply line, as prescribed by in force rules.
• The unit must not be powered up through a dimmer power device.
• Wiring and connection actions are to be performed by a qualified staff.
20 Graph-i-Cell
DMX line
Max 15 meters from ELECTRONIC DRIVER
to the first Graph-i-cell
Max 3 meters
between each unit
20 Graph-i-Cell
AL2093
AL2094
AL2079
AL2079
100 - 277 AC
100 - 277 AC
10
English
