Griven AD4126, Инструкция по эксплуатации

Страница: 21 / 24

5.3 Connection of DMX controller to PC
It is possible to update programmes and presets from a dedicated software on PC.
To install the software it is needed to do these operations BEFORE connecting the controller to the PC:
Download the .zip file from the AD4126 page in the GRIVEN website and unzip in a new file •
http://www.griven.com/upload/pdf/20130618022315_AD4126.zip
enter the file and launch setup.exe •
follow the instructions (just give a series of “OK” for standard installation) •
the installation will be over when the window “FTDI drivers successfully installed” will appear •
To launch the programme:
Start - programmi - DLC904 Programmer - DLC904 Programmer •
Connect the device to a PC using a mini-USB cable (not in-
cluded) and connect to the port "1".
5.3.1 Use of the software
In this page you can change the presets:
1
Language change
Downòload programmes
and presets in the controller
Save programmes
e presets
Load programmes
and presets
DMX value
Controller
firmware
update
English 21