Griven AD 3318, Руководство пользователя

Страница: 14 / 20

The function COLOR SCENE LENGTH allows you to select the duration of each color scene
according to the time frames shown in table 2:
4.2 SYNCHRONIZED Mode (without signal cable)
Simultaneous operation of multiple units can be selected as per what follows:
- Set all units on MASTER operating mode;
- Select the same pre-set program and the same color scene duration for all units (see paragraph
"4.1 MASTER/AUTOMATIC mode");
- Connect all units to the same mains supply by means of the same switch to synchronize the units
for several hours.
Operation with remote control
TIROS EB can be operated through an infra-red remote control.Set dip-switch N°10 to ON in order
to access the projector with the remote.
4.3 DMX-SLAVE mode
Operating the unit in DMX/SLAVE mode requires that the relevant DIP-SWITCH is set to OFF.
The DIP-SWITCHES set must be correctly adjusted when you are controlling the projector via a
remote DMX console (refer to scheme below). Each TIROS EYEBALL projector uses 1 DMX
channel and when each unit is independently controlled by a DMX console, the DIP-SWITCHES
set must be arranged as per following table:
The first 8 DIP-SWITCHES are used to set the DMX address of the units;
14
COMBINATION Colours Scene Length
OFF/OFF 5 sec.
ON/OFF 10 sec.
OFF/ON 20 sec.
ON/ON 40 min.
Tabella 2