GRITAL 3001014, Руководство пользователя, Страница: 7 / 10

Setting the working mode:
Set valid card only users
[I][[][]
Entry is by card only
Set valid card and PIN users
[I]DJ[]
Entry is by card and PIN together
Set valid card or PIN users
[I]
w []
Entry is by either card or PIN (default)
To add a user in either card or PIN mode, i.e. in the[]
W W
mode. (Default setting)
To add a
Pin
user [] luser ID number 11[] IPINI �
The ID number is any number between 1 & 2000. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be added
continuously without exiting programming
mode as
follows:
[] luser ID no 11 [] IPINI � luser ID no 21 [1 IPINI �
To delete a PIN user [] luser ID number I �
Users can be deleted continuously without exiting
programming mode
To change the
PIN
of a PIN user [:] 110 number# I !Old PIN # I INew PIN # I !New PIN
#I
(This step must be done out of
programming mode)
To add a
card
user (Method 1) [I !Read card I �
This is the fastest way to enter cards, Cards can be added continuously without exiting
user ID number auto generation. programming mode
To add a
card
user (Method 2) [] I ID number
I[]
IRead card!
�
This is the alternative way to enter cards User can be added continuously without exiting
using User ID Allocation. In this method a programming mode
User ID is allocated to a card. Only one
user ID can be allocated to a single card.
To add a
card
user (Method 3)
[I Icard number I �
Card number is the last 8 digits printed
User can be added continuously without exiting
on the back of the card.user ID number
programming mode
auto generation
To add a card user (Method 4) DJ
I
ID number.#
I
!Card number. #
I
In this method a User ID is allocated to a User can be added continuously without exiting
card number. Only one user ID can be programming mode
allocated to the card number