GRIP Base Connector SWS
Assembly and Operating Manual
10 EC - Declaration of incorporation
according to the Machinery Directive 2006/42/EC, annex II B
The producer / distributor
GRIP GmbH Handhabungstechnik
Alter Hellweg 70
D-44379 Dortmund, Germany
hereby declares that the following products
Product designation:
Base Connector SWS
Functional description:
Type designation:
G-SWS200
EN ISO 12100:2010
Authorized representative Dipl.-Ing. (FH) Hasan Canti
Location:
Dortmund
Date:
Dipl.-Ing. (FH) Hasan Canti
Executive Director
Rev. 1.01
7
He further states that the following essential requirements of the Machinery Directive 2006/42/EC
were applied and observed:
annex I, numerics: 1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.7.4
He further states that the specific technical documentation has been drawn up in accordance with
annex VII, Part B.
The following harmonized standard has been applied:
Safety of Machinery- Basic concepts, general principles for
design- Part 1:
Basic terminology and methodology
23.02.2021
Safety of Machinery- Basic concepts, general principles for
design- Part 2:
Technical principles
In the case of reasoned requests, the specific documents shall be sent to the national authorities
as follows: Post
The product mentioned above may only be put into operation if it has been established applicable
that the unit, into which the above-mentioned product is to be incorporated, complies with the
provisions of the Machinery Directive 2006/42/EC.
Systems for the manual and form-closed exchange of components
such as grippers and tools on robots or receptacles
The provisions of the above-mentioned directives -including their effective amendments- comply
with the time of the declaration.