Grip Rite GR55G10X, Руководство по эксплуатации и список запасных частей

Страница: 10 / 28

OPERATION
STARTING ENGINE
Pre-starting Checklist:
Always check and correct before starting:

Check unit for missing parts or damage.

Check for loose nuts and bolts.

Check compressor and engine oil levels.

Fill gas tank. Tighten gas cap securely.

Check for fuel leaks.
1. Move fuel lever (A) to the ON position.
Cold Engine - move choke lever (B) to
CLOSED position.
Warm Engine - leave choke lever (B) in OPEN
position
2. Turn engine switch (C) to the "ON" position.
3. Pull starter grip (D) softly until you feel light
resistance, then pull briskly. Return starter
grip to starting position. If engine does not
start, repeat.
4. When engine starts, slowly move the choke
lever (B) to the OPEN position.
5. Adjust outlet air pressure to desired setting by
turning pressure regulator knob “E.” Turn
knob clockwise (+) to increase air pressure,
counterclockwise (-) to decrease air pressure.
Outlet air pressure is indicated by gauge (F).
Tank pressure is indicated by gauge (G)
6. Connect air hoses to quick-connect fittings (H)
using a male quick-connect fitting. To
connect air hose, push back outer ring on
compressor fitting, insert male hose connector,
and release ring. To release air hose, push
hose fitting in, push back outer ring on
compressor fitting, and pull male hose
connector out.
WARNING
High pressure air will escape when hose is
disconnected. Keep face away from fittings to
prevent dirt and debris from being blown into eyes.
Always wear safety glasses with side shields to
protect eyes when using compressor.
9