Grindmaster Grind'n Brew-10, Руководство по эксплуатации и инструкция, Страница: 7 / 17

Figure D
Figure E
Setting the Grind
(Refer to Figure D)
Tools Required: #2 Phillips screwdriver, 7/8" box wrench, large flat blade screwdriver
1. Remove front decal panel by removing screw on underside of
panel and 2 screws on both sides of panel.
2. Loosen adjusting screw lock nut by turning counter clockwise.
3. Turn slotted adjusting screw clockwise to make the grind coarser
or counter clockwise to make the grind finer.
Generally, a 1/8 to 1/4 turn will provide the desired adjustment.
4. After adjustment has been made, re-tighten the adjusting
screw lock nut.
5. Visually inspect the grind adjustment with a small portion of coffee and
readjust if necessary.
6. Reinstall the front decal panel.
Maintenance
Daily Cleaning
Cabinet: The outside of the machine can be cleaned with a damp cloth, a household dusting
spray or a stainless steel cleaner. Do not use any abrasive such as Scotchbrite or
Brillo pads. These may mar the finish.
Wipe the underside of the cabinet hood with a clean cloth. Be especially careful
when using soap or detergent around the sprayhead. Any soap left on the deflector
may give an unpleasant taste to the first brews.
Warmers: The warmer plate is easy to clean and will maintain its appearance longer if cleaned
regularly. Coffee stains can be wiped off with a damp cloth. Use detergent or
sanitizer for heavy deposits, but refrain from using abrasives.
Weekly Cleaning
(Refer to Figure E)
Slide Valve: The slide valve behind the spray deflec-
tor under the cabinet hood should be wiped off with
a clean, dry cloth. Using the finger tab open the slide
valve and wipe the ground coffee from inside of the
spout, seal and slide valve.
NOTE: When the machine is not in use, the finger
tab will automatically activate every 60 minutes
to keep clear
.
Brew Basket, Airpots and Decanters: Use com-
mercial grade urn cleaner (as directed by manufac-
turer) and rinse thoroughly.
Page 7 Grind’n Brew Coffee Systems™