Grillstream Elite GSS66SS Скачать руководство пользователя страница 3

GSS66SS

Page 3

THE HOSE AND REGULATOR ASSEMBLY

- Must be suitable for liquefied petroleum gas (LPG)

- Must withstand the above pressures

- Must not exceed 1000mm (39”) in length

- The BBQ is supplied with a 1/4” BSP LHT adaptor and screw on hose

that is suitable for direct connection of a suitable regulator

- Before connecting inspect the hose, its fittings and rubber seals. If

there is any sign of cracking, splitting or wear, have the hose

replaced

- While in use, keep the hose unobstructed and free of kinks and

twisting

CONNECTING THE GAS CYLINDER

There are two different types of gas that can be used on your gas BBQ

depending on where you live, that being either butane or propane gas.

Both are supplied in gas cylinders. The connection between the gas

cylinder and the BBQ is made with a regulator. (Fig. 2)

It is important that you use the correct regulator for the particular type

of gas you purchase. See your local gas dealer for information on

purchasing the correct regulator. Never operate this BBQ without  

a gas regulator.

430

mm

 

Min

imu

m

430

mm

 

Min

imu

m

430m

Minim

um

430m

Minim

um

1000

mm M

inimu

m

(Fig. 1)

(Fig. 2)

The following gas supply pressures are a guide only:

For  DK   FI   NO   NL   SE   HR   SI    IS 

Butane - 30 millibars

Propane - 30 millibars

For  GB   IE   BE   FR   GR   IT   ES   LU   PT   CH   CZ
Butane - 28 millibars

Propane - 37 millibars

For  DE   AT
Butane - 50 millibars

Propane - 50 millibars
FOR AUSTRALIA 

Propane - 2.75 kPa

Universal LPG -   2.75 kPa   

1 3 B/P (30)

1 3 + (28 - 30/37)

1 3 B/P (50)

EE LV

LOCATION OF YOUR BBQ

IMPORTANT - BBQS MUST BE INSTALLED IN ACCORDANCE WITH

THE MANUFACTURER’S INSTALLATION INSTRUCTIONS, LOCAL

GAS FITTING REGULATIONS AND MUNICIPAL BUILDING CODES.

Think carefully when deciding on a location where you are to use your

BBQ. The BBQ must not be installed under or on any combustible

material and must be a level surface.

Minimum clearance from any combustible materials on ALL sides is

430mm (18”). Minimum clearance from any combustible material from

the TOP of the BBQ is 1000mm (39”). (Fig. 1)

-      Not to be used in garages, porches, breezeways, sheds, or other

        enclosed  areas

-  Not to be used on recreational vehicles

-  Do not obstruct flow of combustion and vetilation air around the BBQ 

GRILLSTREAM BARBECUES,

LEISUREGROW PRODUCTS LTD.

Product name

Outdoor gas Grill

Model Number

K116SBGE35

Product Identification Number

0359CP1429

Gas Category

I

3+(28-30/37)

 

o

I

3B/P(30)

 

o

I

3B/P(37)

 

o

I

3B/P(50)

 

o

Gas and Supply Pressure

Butane(G30)

Propane(G31)

Butane

Butane

Butane

28-30 mbar

37 mbar

29 mbar

37 mbar

50 mbar

Country of Destination

I

3+(28-30/37)

: BE,CH,CY,CZ,ES,FR,GB,GR,IE,IT,LT,LU,LV,PT,SK,SI.

I

3B/P(30)

: CY,CZ,DK,EE,FI,FR,HU,LT,IT,NO,NL,SE,SI,SK,RO,HR,TR,BG,IS,LU,MT.

I

3B/P(50)

: AT,CH,CZ,DE,SK

I

3B/P(37)

: PL

Main Burner Injector Size

Ø 0.92 mm

Ø 0.92mm

0.86mm

Ø 0.81 mm

Side Burner Injector Size

Ø 0.88 mm

Ø 0.88 mm

0.79mm

Ø 0.75 mm

Total Nominal Heat Inputs (Hs)

24.5kW (1781g/h)

Electric Energy(V/DC)

1X1.5V-Infrared Side Burner Ignition

Serial Number
Use Outdoors Only.
Read the instructions before using the appliance.
Warning : Accessible parts may be very hot. Keep young children away.

Made in China

2575 – 20

           WARNING INFORMATION

-  Read this Operating Manual before use

-  Ensure there is adequate clearance away from flammable  

 materials

-   Please do not use in windy conditions as flame efficiency may 

 

be affected and could cause excesive heat on the front panel.

-  This BBQ is only to be used outdoors

-  Do not allow children to operate the BBQ

-   Accessible parts may be very hot, keep children away. Even after 

tu rning off, BBQ will remain hot.

-  Any modification of this BBQ may be dangerous

-  Do not move this BBQ during use

-   When you have finished cooking, turn off the gas cylinder before 

you turn off the BBQ controls to ensure any gas in the pipeline is 

used up.

-  Parts sealed by the manufacturer or their agent must not be

  manipulated by the user

-  BBQ specifications can be found on the data label attached on  

  the side panel of the BBQ frame

-  Do not store or use petrol or other flammable vapours and liquids

  near the BBQ

-  Do not store empty or full spare gas cylinders under or near 

 

  the BBQ

-  Keep the gas hose and any electrical cord away from hot surfaces

-  Avoid unnecessary twisting of the gas hose

-  Visually inspect hose prior to each use for cuts, cracks, excessive

  wear or other damage

-  The hose must be replaced if damaged and when National  

  Conditions require it

-  Never light the BBQ with the hood or lid closed

-  Never lean over the cooking surface whilst lighting the BBQ

-  Use BBQ tools with heat proof handles or good quality insulated  

  oven mitts when operating BBQ

-  Never alter or modify the regulator or gas supply assembly 

Содержание Elite GSS66SS



































Отзывы: